Your HP Zbook won't turn on and you would like to know what to do In that case? This may sound very disturbing. But there are methods for arrange a computer that fails to start. So to explain to you better. We will begin this article by exposing you the main causes why your computer can no longer start. Then we will detail you 2 solutions to fix the malfunction of your HP Zbook. You can choose between reset the entire system with a bootable key. Or you can try to fix it with Windows Recovery Environment tools.
Why won't my HP Zbook turn on?
How does booting an HP Zbook work?
There can be various reasons that can prevent your HP Zbook from booting. Indeed, starting a computer, also called priming, step by step. Nevertheless among these, your computer will carry out a certain number of tests. In case one of them is inconclusive. It may block launching the Windows operating system.
The reasons for a startup malfunction on an HP Zbook:
A starting problem is most often caused by updating a system driver which could not be installed. Otherwise it can also be a memory problem which is full. Or it may come from a faulty system folder ou of malware.
The hypothesis of a hardware malfunction on an HP Zbook:
In any case, if it is a software malfunction. You can still fix it. On the other hand, it is possible that your HP Zbook no longer turns on because of a hardware malfunction.
In fact, when your Hard disk is damaged. Then the operating system cannot be launched. So you will not be able to turn on the PC. You should know that some elements such as the DD turn out to be very fragile. If you find yourself in this situation, you will either have to go to a trusted repairer. Otherwise you will be able to opt for a external hard drive. The latter must remain constantly connected to your computer. And you will have to install Windows 10. Thereafter, you will have to make sure that it is identified as the main HDD on your HP Zbook by going through Windows disk manager.
How do I fix my HP Zbook that no longer turns on?
when HP Zbook won't turn on anymore. You have 2 options to fix it. If you want reset the system and reset it. So you are sure that your computer is completely cleaned. However, be aware that this will delete all of your data and applications. Otherwise you can also try Fix it with Windows Recovery Environment. To give you the choice, we have detailed each of the solutions below.
Reset my HP Zbook that no longer starts with a bootable USB key:
To reset your HP Zbook with a bootable USB drive. You will first have to create it. The latter will contain the ISO file of the Windows 10 support creation tool. The latter can be downloaded from the official Microsoft website just here . All you need to do is download the installation media. Then when you launch it, you will have to select the options “Create installation media (USB stick, DVD or, ISO file) for another PC” et “USB flash drive”. These allow you to create the bootable USB key.
Once it is created. It just takes start your HP Zbook using the key plugged into the USB port. This will allow you to automatically access to the Windows 10 installer. If this is not the case, depending on the year of manufacture of your HP Zbook, you will have to go to the BIOS. In the latter you can select on which drive your machine should boot.
If you would like more information about this. We advise you to also consult the following tutorial: HOW TO RESET AN HP Zbook
Resort to repair tools on WinRe to be able to turn on my HP Zbook:
If you want to try to fix the malfunctions of your HP Zbook. Feel free to use WinRe recovery environment. The latter will be accessible even if your computer does not start. Except when the problem is hardware.
How to reach Windows Recovery Environment using my HP Zbook that won't turn on:
To access it you will have to carry out the procedure explained below:
- First press the power key of your HP Zbook,
- When the system is loading, turn off the PC by pressing and holding the Power button,
- Repeat these 2 things until: when you start your computer, you have WinRe "Choose an option" blue screen.
Access repair tools on WinRe to fix my HP Zbook problem:
When you're on the screen “Choose an option”. You will have to select the option "Troubleshooting". This will take you to the screen " Problem resolution ". On this one you have the possibility to choose to reset your HP Zbook. But we suggest you first select " Advanced options ".
In this way on the screen " Advanced options ", you can select one of the alternatives below to try to solve your problem.
The System Boot Boot Tool:
This tool will allow scanner your PC. Thus, he will be able to detect a malfunction and perhaps even solve it. So it can be practical to start repairs with the latter. All you have to do is press the button. Thereafter, you will have to enter the identifier of your Microsoft account (mail or telephone) and its code.
Uninstall updates :
This option will be particularly interesting for your malfunction, when it occurred following a Windows Update update. It will allow you to delete the latter to allow you to access your Desktop again.
Settings :
This option will be recommended when you have a black screen when turning on your HP Zbook. Indeed, it will most often be generated by a display problem. But via the Settings, you can turn on your computer in safe mode. The latter particularly lowers cases of display errors. Therefore you will access the desktop with minimal functionality. And so you can try to solve it. In particular with an update of the pilot full Graphic card Or other.
System Restauration :
Restoring a system will be very useful because it allows to keep recorded files on your HP Zbook. But it will remove apps and programs that were installed after the create system restore point. This will fix a problem caused by installing software. However, it is essential to have activated the backup option on your HP Zbook.
Command Prompt :
When you are familiar with system repair commands such as sfc / scannow . Using the command prompt can be interesting.
System Image Recovery :
The system image also named disk image is a file containing all the data and programs of a computer. It is in a way a virtual copy from your HP Zbook at a time. So it will be very useful for remettre your comp to the backup state. However, to select this option, it is essential to have created an image before your computer encounters malfunctions.
To conclude : In case your HP Zbook does not turn on anymore. And you have no idea what to do, don't worry. Indeed, if it is a software malfunction. You will be able to apply some methods to try to arrange your computer. For example by using windows 10 repair tools as the system startup tool. If these do not work then you have the option of resetting Windows. Or reinstall it with a bootable key. If despite these details, this does not fix your problem. You can also call the Microsoft support.
If you are ever looking for other tutorials on your HP Zbook, you can watch the tutorials in the category: HP Zbook.
